Nowadays the dairy plants have started using milking machines to extract the milk from the cow’s teat. Whenever the traditional farmers are advised to carry out this approach, then their first question is regarding the milking machine price.
In today’s web post we shall be learning how the milking machines help to extract the milk from the teats of the cows and how they are designed to help to maintain the ideal blood circulation in the cow’s teats.
If you are eager to know how these milking machines are designed and how they operate in the milking farms, then today’s blog is surely going to be for you.
• SEALING OF TEATS AND THE MILK
The teats of the cows and the milk hose are sealed with a tightened seal. The milk hose will then be used to transport the milk. The lines which are connected with the vacuum pump are operated by making use of the valve.
Do you know?
The section which is located between the liner and the oyer shell is known as the pulsator chamber.
• APPLICATION OF THE VACUUM
Usually, this process requires the use of a constant vacuum. The pressure will be applied to the milk hose as they are quintessentially shorter in length.
Do you know?
When the pressure of the vacuum gets equalized between the chamber and the milk hose, then the liner gets opened.
Afterwards, the teats are exposed in such a way that a flow of the milk can get triggered when the vacuum is applied to the hose tube.
• ANOTHER EXPOSURE OF THE LINER TO THE AIR
Once the pulsator has ended up releasing the vacuum, then the liner gets exposed to the air.
Do you know?
If the pressure inside the chamber gets increased, then a massaging motion will be encountered when the liner gets both collapsed and tightened.
A total of 60 cycles can be completed in a single minute.
• FORMATION OF THE CLAW
The cups are connected to form the milk hoses. The joining together of these is known as the claw. This is the junction at which the milk from all four teats gets mixed up. This is considered one of the longest milk hoses. As long as the result of the vacuum is concerned, the entire line may become a path to draw the milk.
• MIXING TOGETHER
The jar receives the milk when the milk runs through the long milk hose. In case, the air gets trapped in the milk column, it is only the jar where it is supposed to get released. Also, this junction is responsible for mixing the milk obtained from the different cows.
• MILK PUSHING
No sooner than the jar gets filled, the pump commences pushing the milk into the main tank. This is where it can get immediately refrigerated.
HOW DOES AUTOMATION OF THE MILKING MACHINES HELP TO SAVE ENERGY?
Usually, the modern milking machines are designed in a way that they only stop when the udder of the cow gets emptied. Afterwards, these get switched off automatically.
Not only this but the efficient design of the cups gets automatically received from the cows.
How does the whole process end?
No sooner, the whole process gets ended, the iodine solution will be used to make the teats dipped. This helps to make sure that no infection is allowed to get spread. This is usually known as the sterilization process.
If you want absolutely detailed information on this topic, then make sure you are giving your feedback to us.